SYSTEM
SET-UP
•Press HEAT/COOL again for the fourth
Set-Up which is indoor temperature
calibration. This is best left to profes-
sionals. But if
you
and your independent
thermometer say the Home Comfort
Sensor is off and you really want to
change it yourself, use the ARROW
keys to change the calibration of the
indoor temperature sensor. You’re in this
mode when the letters CAL appear.
•Press EXIT to return to normal
operations.
You have now completed the set-up and
scheduling of your Home Comfort Sensor. Replace
the unit to its mounting bracket. When the word
“connect” disappears, your Trane Integrated
Comfort System is ready for operation.
16
To Next Page
Loading...
