EasyManuals Logo

Transfer Flow TRAX3 User Manual

Transfer Flow TRAX3
11 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
9
Transfer Flow, Inc. fuel systems are designed to work only with specic
components which have been selected for their unique properties. Years of
design work have produced the nest auxiliary fuel system available that relies
on relatively few, but critical parts. e components used in Transfer Flow fuel
systems are not generic or “o-the-shelfparts and cannot be replaced with
parts that appear to be similar.
For example, the in-line fuel pump used with our TRAX 3™ system appears to
be a normal fuel pump, but it is actually a high quality solenoid pump with a
critical forward and reverse check feature. Under no condition should any
other pump be substituted for the provided pump.
is auxiliary fuel system has been outtted with a replaceable fuel lter
that requires periodic service. e lter is available though automotive parts
retailers and is not covered by Transfer Flow’s warranty. e lter should be
inspected/replaced every 3 - 6 months depending on the conditions that the
vehicle is operated in and the quality of fuel purchased. Transfer Flow will not
honor warranty claims from diagnosis or replacement of obstructed lters.
Transfer Flow Replacement Parts

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Transfer Flow TRAX3 and is the answer not in the manual?

Transfer Flow TRAX3 Specifications

General IconGeneral
BrandTransfer Flow
ModelTRAX3
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals