EasyManua.ls Logo

Transfer Flow TRAX3 - Important Safety Information

Transfer Flow TRAX3
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Important Safety Information
Manual operation of the TRAX 3™ Liquid Crystal Display (LCD)
while driving could lead to unsafe driving conditions which can
cause an accident or a serious injury. Observing the screen should
only be done when it is safe to do so. Mounting the TRAX 3™ LCD and routing
the wire harness should be done where the driver’s view or operation of the
vehicle cannot be obstructed.
Filling e Fuel Tank:
Never ll a fuel tank near a ame or ignition source which might ignite
the fuel vapors.
Never ll the OEM or Transfer Flow auxiliary fuel tank with the engine or
ignition turned on.
Avoid breathing fuel vapors or allowing fuel to contact the skin.
Always ll fuel tanks while the vehicle is on a at level surface.
Always open the fuel cap slowly to allow any pressure to escape.
Never overll or “top-o ” any fuel tank. Overlling the fuel tank may
cause damage to the emissions system, cause dangerous spills and possibly
result in a re. e Transfer Flow TRAX 3™ system may also shut down in
the event of a “top-o ” condition.
Never siphon fuel using the mouth, as this practice is dangerous and
potentially fatal. Use an appropriate pump.
Never allow fuel to contaminate soil or waterways. Properly contain and
dispose of spilled fuels and cleanup materials.
Other Important Safety Information:
Use only Transfer Flow, Inc. replacement parts. Many parts of our fuel
system appear common, but are actually special parts which are critical for
safe operation. See page 9 for more information.
Disconnect the battery before working on Transfer Flow fuel systems.
Never modify or over-pressurize a fuel tank.
Do not grind, torch, weld, cut, or modify a fuel tank.
Do not sleep, or let pets stay in a pickup with a camper shell that contains
an in-bed fuel tank system.
NEVER connect a TRAX 3™ system to a previously modied fuel system.
Do not smoke near a fuel tank.
TRAX 3™ is designed to work only with Transfer Flow auxiliary fuel
tanks. Under no circumstance should TRAX 3™ be used in conjunction
with a modied fuel tank system, or other aermarket fuel tank systems.

Related product manuals