Need help?Do you have a question about the Transfer Flow TRAX 4 and is the answer not in the manual?
General| Model | TRAX 4 |
|---|---|
| Display | LCD |
| Type | Flow Meter |
| Operating Temperature | -10°C to 50°C |
| Compatibility | Various |
Explains the system's automatic fuel transfer and monitoring functions.
Guides users through initial setup and pairing of the mobile app with the TRAX 4 system.
Details the Bluetooth pairing process required for mobile app connectivity.
Describes the functions of each item in the mobile app's main menu.
Explains common status messages like "ALL GOOD", "PUMP ON", and "ERROR".
Details how the system estimates the remaining driving range based on fuel levels.
Illustrates how the app displays main and auxiliary tank fuel levels and transfer logic.
Explains how to access and understand error codes for troubleshooting.
Describes the diagnostic data screen for technical support purposes.
Details the DTC Log for reviewing past error readings.
Describes the optional in-cab display for auxiliary fuel tank level monitoring.
Addresses fuel level accuracy, fluctuations, and display changes during driving.
Covers common issues like "ERROR" messages and general problem resolution steps.
Discusses transferring the TRAX 4 system to a different vehicle.
Details filter replacement intervals and procedures.
Outlines steps to take upon encountering a "CRITICAL FAILURE" message.
Essential safety guidelines for filling fuel tanks safely.
Other safety advice regarding system use and modifications.
To Next Page
