Transfer Flow’s TRAX 4™ is a computer-controlled, self-diagnosing auxiliary
fuel system that automatically transfers fuel from the auxiliary tank to the
main tank using our exclusive AutoTrans
®
technology. The TRAX 4™ system
also monitors the vehicle’s fuel system status and the fuel levels of each tank.
TRAX 4™ transfers fuel as needed with an electric fuel pump at a rate of one
gallon every three minutes.
Fuel System Overview
The TRAX 4™ system will transfer fuel at predetermined fuel levels while the
vehicle is in use, based on the individual vehicle fuel system calibration and
size of the Transfer Flow auxiliary fuel tank. The fuel level in the main tank and
auxiliary tank will decrease at similar rates. If the mobile app is being used,
the gallons or percentage of fuel in each tank will be displayed on your mobile
device, as well as the operational status of the system, and miles to empty.
In normal operations, the message “ALL GOOD” will be displayed under Fuel
System Status on your home screen.
During fuel transfer, the message “PUMP
ON” will be displayed.
If there is an issue with the fuel system, the message
“ERROR” will be shown.
If you prefer not to use the TRAX 4™ mobile app, you may want
to consider our in-cab fuel level monitor LCD. The LCD shows the
fuel level of the auxiliary tank with an easy-to-read bar graph that
decreases when fuel is transfered to the pickup’s main fuel tank.
TRAX 4
™
Fuel Management System
1
To Next Page
Loading...
Need help?
General
