Optional In-Cab LCD
Fuel Level Monitor LCD
If you prefer not to use our TRAX 4™ app with your auxiliary tank but still
want to know how much fuel is in the auxiliary tank, consider our in-cab
fuel level monitor LCD. The LCD shows the fuel level of the auxiliary tank
with an easy-to-read bar graph that decreases when fuel is transfered to
the pickup’s main fuel tank. The LCD can be used in conjunction with the
TRAX 4™ mobile app, or by itself. This item is sold separately.
Fuel Level Monitor LCD
(part no. 040-01-17100)
g. 14
7
You can use the Manual Fuel Transfer Button (fig. 12)
to manually transfer fuel. When the button is pressed,
and the main tank is below 85%, the pump will turn
on for a ve minute cycle or until the main tank’s fuel
capacity is at 85% or above. As a safety feature to
prevent overlling, the button will not do anything
when the main tank is over 85%. Pressing the button
again will turn o the pump. The red light around the
button indicates when the fuel pump is on, and fuel is
being transferred
(fig. 13).
If the red light around the button is blinking, the
system is in an error mode. To troubleshoot the issue,
open the mobile app and consult the trouble shooting
tab, or call tech support at (800) 442-0056.
Manual Fuel Transfer Button
g. 12
g. 13
To Next Page
Loading...
Need help?
General
