Transition Networks E-100BTX-FX-05 User Guide
33210 Rev. R http://www.transition.com/ Page 13 of 17
Technical Specifications
For use with Transition Networks Model E-100BTX-FX-05(xxxx) or equivalent
Data rate: 100 Mb/s
Dimensions: 4.75" x 3.0" x 1.0" (119mm x 76mm x 25mm)
Weight: 6 oz. (181 g) approximately
MTBF: Greater than 46,768 hours (MIL-HDBK-217F)
Greater than 123,861 hours (Bellcore7 V5.0)
Power supply (standard temperature) 12 VDC, 0.5 A (minimum)
DC output: (extended temperature) 9 VDC, 1.0 A (minimum)
minimum output regulation: 5%
Environment: Tmra* (standard temp): 0°C to 50°C (32 to 122°F)
Storage Temperature: -15°C to 65°C (5 to 149°F)
Tmra* (extended temp): -25°C to 65°C (-13 to 149°F)
Storage Temperature: -25°C to 65°C (5 to 149°F)
Humidity: 10% – 90%, non-condensing
Warranty: Lifetime
* Manufacturer’s rated ambient temperature.
CAUTION: Visible and invisible laser radiation when open. Do not stare into beam or view directly with
optical instruments.
CAUTION: Use of controls, adjustments or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
CAUTION: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485,
DS1, DS3, Video Coax, etc., are intended to be connected to intrabuilding (inside plant) link segments
that are not subject to lightening transients or power faults. Copper based media ports, e.g., Twisted Pair
(TP) Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to
inter-building (outside plant) link segments that are subject to lightening transients or power faults. Failure
to observe this caution could result in damage to equipment.
To Next Page
Loading...
