3200B SERIES OPERATION MANUAL
TRANSMILLE LTD. Page 6
3200B Electrical Test Equipment Calibrator Introduction
The 3200 Electrical Test Equipment Calibrator is a breakthrough in electrical test
equipment calibration providing a complete solution for testing:
Insulation Testers
RCD Testers
LOOP Testers
Portable Appliance Testers (PATs)
Extended Functionality
The 3200B Calibrator can be enhanced with options to provide high accuracy
resistance, increased resistance range (up to 10GΩ) for Insulation testers, auto loop
measurement and two external resistance inputs to extend the range of available
resistors.
A complete electrical test equipment calibration solution
Designed to provide an accurate cost effective portable instrument for the calibration
of Insulation & Continuity testers, RCD testers, LOOP testers, Multifunction testers
and Portable Appliance Testers (PAT), the 3200B calibrator can be combined with
the
ProCal Calibration System to allow automated calibration.
IMPORTANT OPERATIONAL NOTE
For correct operation the Phase (Live) and Phase (Neutral) MUST be connected round
the correct way (some plugs used in non-UK countries can be connected either way
round, therefore this check is necessary) For International models the 3200B
automatically detects incorrect polarity and will not power on until this is corrected
(function not required for UK models).
To Next Page
Loading...
