3200B SERIES OPERATION MANUAL
TRANSMILLE LTD. Page 9
Preparing the calibrator for use.
Initial Inspection.
After shipment the calibrator should be inspected for any signs of external damage.
Should external damage be found contact the carrier immediately. Do not connect a
damaged instrument to the line power as this may result in internal damage. Please
retain the original packaging; this should be used when returning the calibrator for
service and recalibration.
Shipping Checklist
1 x USB interface lead
1 x Operation manual (this document)
1 x PAT Test Lead
1 x Adapter Connection Lead (only if option FLASH or BREAKD fitted)
Lifting and carrying the calibrator
The calibrator can be carried by one person supporting the underneath (note:
observe all normal practices for health and safety when carrying). A custom carry
case with shoulder strap is available if the calibrator is to be regularly transported -
see options list. The calibrator should always be placed down on a firm flat surface
on its base feet. Avoid knocking or banging the calibrator and always place down
smoothly.
Warning
DO NOT DROP THE CALIBRATOR – This may cause internal damage
To Next Page
Loading...
