-2-
(6) Storage
a. The store room must be dry.
b. Do not expose the machine to extreme cold or heat environment.
c. Place the machine on an even floor in order to avoid any distortion.
(7) Other Reminders
a. Do not alter or bypass protective interlocks.
b. An operation manual must remain attached to the machine at all times.
c. Do not alter the equipment or circuitry unless authorized to do so by the manufacturer.
d. Do not operate the machine with the table tops or covers removed.
e. Never put any part of your body near, under or into a moving machine.
f. Do not overload the machine by exceeding the performance limitations specified in
this manual.
2. Construction and Units
Strapping head unit
Control Panel
Reel unit
Body frame unit
To Next Page
Loading...
