Need help?Do you have a question about the Transpak TP-6000CE1 and is the answer not in the manual?
Overview of the operation manual and the spare parts list for the strapping machine.
Instructions for before, during, and after operating the machine, including PPE and monitoring.
Explanation of controls like Start, Stop, F/R, Power, and Selector switches for the standard model.
Details on magnetic switch and timers T1/T2 for three-phase models.
Details on timers T1/T2 for single-phase models.
Step-by-step guide for loading PP strap onto the machine, covering coil placement and threading.
Operating procedures specific to standard and CE models.
Adjusting the tension knob for optimal strapping.
Setting the heater temperature for proper sealing.
Adjusting clearance based on strap thickness for proper feed.
Wiring diagram for the specified models.
Wiring diagram for CE version models.
Wiring diagram for 3-phase models.
Lists parts for 12mm, 9mm, and 15.5mm strapping heads.
Detailed parts lists for 1PH and 3PH cam groups.
Lists parts for 12mm, 9mm, and 15.5mm slide table groups.
Lists parts for 12mm, 9mm, and 15.5mm bandway groups.
Lists parts for 12mm, 15.5mm, and 9mm accumulator units.
Lists parts for reel control group and stainless steel model.
Lists parts for body frame group and stainless steel model.
General| Brand | Transpak |
|---|---|
| Model | TP-6000CE1 |
| Category | Packaging equipment |
| Language | English |
To Next Page
