-1-
1. Safety Instructions
THIS MANUAL GIVES YOU INFORMATION ON SAFETY INSTRUCTIONS,
SPECIFICATIONS, OPERATION AND MAINTENANCE OF STRAPPING
MACHINES.
BEFORE OPERATING OR SERVICING THE MACHINE, PLEASE REVIEW THE
ENTIRE MANUAL AND FOLLOW THE SAFETY INSTRUCTIONS CAREFULLY.
(1) Before Operating
a. Verify that the power line voltage is correct.
b. The machine must be properly grounded to avoid a shock hazard. All wiring must be
in accordance with local wiring standards.
c. The strapping machine can only be operated with polypropylene (P.P.) strapping; do
not use polyester (PET) strapping or polyethylene (PE) cord strap.
(2) During Operation
a. The weight of the package cannot exceed 100 kg (220 lbs).
b. The size of the package should not be less than 80mm (width) × 20mm (high) (3.16＂
×0.79＂).
c. Check if the machine emits any smokes or unusual sound when it is running.
(3) After operating
a. Remove dust and dirt from the unit; pay particular attention to the interior of the arch.
b. Turn off the power when the machine is not in use.
(4) Signs
(5) Maintenance
a. Turn off the power before removing either of the top covers.
b. Use the correct tools and parts to repair the machine.
c. The heater tongue is very hot; do not touch it.
Caution!
Electric Shock Hazard
Caution!
Hot!
Do not touch!
To Next Page
Loading...
