EasyManuals Logo

TRANSTEK LS805-B User Manual

TRANSTEK LS805-B
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
11
10
Delete the Records
1.When under data enquiry mode, press
and hold “Query” button for 3 seconds to
clear memory. The LCD will display the
blinking “dEL ALL”.
Data Management
Recall the Records
2.Press “Query” button again to rotate the
records. Up to 60 records will be stored
under each user ID.
The measurement date and time will be
displayed alternatively.
1.When the monitor is OFF, press “Query”
button to retrieve the memory. The monitor
will display the average value of last three
measurements.
3.Press “User 1” button or “User 2”
button to switch between two users.
4.Press the corresponding User ID button to turn off the monitor. Otherwise, the
monitor will automatically shut off within 1 minute after last operation.
Data Management
After correctly positioning the cuff, press “User 1” (“User 2”) button to turn on
the monitor, and it will complete the measurement process automatically.
No Record found for User 2!
2.Press “Query” button to confirm clearing
memory. The LCD will display “dEL dOnE”.
Data Transmission
1.With LS805-B successfully pair-up with your iPhone, the measurement data will be
automatically transmitted to your mobile via Bluetooth.
2.The symbol will disappear after successful data transmission, and you may check
your personal health data stored in your iPhone.
3.If the data transmission fails, the symbol will remain. The pending measurement
data will be transmitted to your iPhone when next measurement is complete.
Interference may occur in the vicinity of equipment marked with the following
symbol . And the monitor may interfere vicinity electrical equipment.
To enable the data transmission function, this product should be paired to a
Bluetooth end at 2.4 GHz.
CAUTION
How to mitigate possible interference?
1.The range between the monitor and the Bluetooth end should be reasonably close,
from 1 meter to 10 meters. Please ensure no obstacles between the monitor and the
Bluetooth end so as to obtain quality connection.
2.To avoid interference, other electronic devices (particularly those with Bluetooth
transmission / Transmitter) should be kept at least 1 meter away from the monitor.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TRANSTEK LS805-B and is the answer not in the manual?

TRANSTEK LS805-B Specifications

General IconGeneral
BrandTRANSTEK
ModelLS805-B
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals