TRANSTEK LS802-GP - User Manual

When symbol shown on
the LCD, indicating pair-up
succeed. Then the device
will turn off automatically.
Quick Start
Guide
Pro Cellular Blood Pressure
Monitor LS802-GP
Insert four AA batteries into
the back of the scale. Once
inserted, the scale will perform an
initial secure pairing with the
mobile network.
1
3
4
6
8
2
5
7
Vital Remote Links Body Scale
Wrap the cuff around your arm,
make sure the cuff edge 1 inch
(2-3 cm) above the elbow.
Don't make it too tight—allow a
finger to fit between the cuff and
your arm.
Lay your arm on a table with
your palm facing up. The cuff
should be at the same height
as your heart.
The whole LCD display, then
the symbol and will
be shown alternatively on the
LCD, indicating pair-up is
proceeding.
Plug the connector on cuff
tube into the device.
Press the " ” button to
turn on the monitor, remain
still until the cuff deflates
completely.
Display and save the results.
10
9
Data transmission after
measurement.
The symbol blinks
on the LCD.
3.If the data is successfully
ransmitted, the symbol will
disappear and the LCD will display
and then the device will turn off.
Transmission in progress
Transmission successful
2~3cm

TRANSTEK LS802-GP Specifications

General

Brand	TRANSTEK
Model	LS802-GP
Category	Blood Pressure Monitor
Language	English

Summary

Quick Start Guide: Blood Pressure Monitor Setup

Device Preparation and Pairing

Install batteries, connect cuff, and initiate device pairing with the mobile network.

Measurement Procedure

Learn how to correctly wrap the cuff, position the arm, and start the blood pressure measurement.

Result Display and Data Transmission

Understand how results are displayed and transmitted after the measurement is complete.

Troubleshooting Common Issues

Power and Display Problems

Addresses no power or display issues by checking batteries and adapter insertion.

Low Battery and Error Messages

Covers low battery indicators and common error codes with remedies like cuff adjustment.

Measurement and Communication Failures

Details remedies for failed measurements, communication errors, and hardware issues.

Warning Messages and Support

Explains warning messages for measurement range and advises on contacting support.