Why TRANSTEK Blood Pressure Monitor display is dim?
A dim or unlit display on your TRANSTEK Blood Pressure Monitor usually indicates exhausted or low batteries. Replacing them with new ones should solve the problem. Another cause might be that the batteries are inserted incorrectly; ensure they are correctly oriented in the compartment.
What to do if TRANSTEK TMB-1581-S Blood Pressure Monitor shows E 10 or E 11?
If your TRANSTEK Blood Pressure Monitor displays 'E 10' or 'E 11', it means the monitor detected motion, talking, or a poor pulse signal during the measurement. To resolve this, relax for a moment and then measure again, ensuring you remain still and quiet during the process.
What does EExx mean on TRANSTEK TMB-1581-S Blood Pressure Monitor?
If 'EExx' appears on the display of your TRANSTEK Blood Pressure Monitor, it indicates a calibration error. Retake the measurement. If the problem persists, this suggests a more significant issue.
What to do if TRANSTEK TMB-1581-S shows E 1?
If your TRANSTEK Blood Pressure Monitor shows 'E 1', it indicates that the cuff is not secure. Refasten the cuff properly and then measure again to ensure accurate readings.
What to do if TRANSTEK TMB-1581-S Blood Pressure Monitor shows E 3?
If your TRANSTEK Blood Pressure Monitor displays 'E 3', this indicates that the cuff is not secure. Readjust the cuff, relax for a moment, and then measure again.
What to do if TRANSTEK TMB-1581-S shows E 2?
If your TRANSTEK Blood Pressure Monitor displays 'E 2', it means the cuff is very tight. Refasten the cuff and then measure again, ensuring it's snug but not overly restrictive.
What to do if TRANSTEK TMB-1581-S is out of measurement range?
If your TRANSTEK Blood Pressure Monitor is out of measurement range, relax for a moment. Refasten the cuff and then measure again.
Details various symbols and their meanings relevant to the safe operation and handling of the device.
Highlights critical warnings regarding device usage, patient suitability, and medical advice.
Provides further warnings on device usage, patient conditions, and self-diagnosis.
Explains the meaning of various symbols displayed on the device's LCD screen.
Identifies and illustrates the different parts and buttons of the blood pressure monitor.
Guides users on how to safely install and replace the batteries in the blood pressure monitor.
Provides step-by-step instructions for setting the date, time, and measurement unit on the device.
Lists common problems, symptoms, checks, and solutions for troubleshooting the device.
Presents guidance and manufacturer's declaration for electromagnetic emissions (Table 1).
Provides guidance and manufacturer's declaration for electromagnetic immunity (Table 2).
Details guidance and manufacturer's declaration for radiated RF and wireless communications immunity (Table 3).
General| Model Number | TMB-1581-S |
|---|---|
| Type | Upper Arm Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Cuff Size | 22-42 cm |
| Measurement Range (Blood Pressure) | 0-299 mmHg |
| Measurement Range (Pulse Rate) | 40-199 beats/min |
| Accuracy (Blood Pressure) | ±3 mmHg |
| Memory | 2 x 60 sets |
| Operating Temperature | 5°C to 40°C |
| Operating Humidity | 15% to 85% RH |
| Storage Temperature | -20°C to 55°C |
| Display | LCD |
| Power Source | 4 x AA batteries |
| Automatic Shut-off | Yes |
| Accuracy (Pulse Rate) | ±5% |
To Next Page