DATA MANAGEMENT
Inflating and measuring.
Display and save the
measuring result.
2.Press “START/STOP” button to power off,
otherwise it will turn off within 1 minute.
mmHg
mmHg
After the measurement was finished, the
symbol will start blinking, and the
data will start transmitting.
4. If the data transmition fails, the monitor will turn off automatically.
3. If the data transmits successful, the
symbol and symblo will
disappear, and then the monitor will
turn off.
mmHg
DATA MANAGEMENT
Recalling the Records
1.
mmHg
MEASUREMENT
When the monitor is off,press “MEM”
button to show the latest record. If there
are more than 3 records, it will show the
average of latest three records.
To Next Page
Loading...
Need help?
General
