1312
1.When the monitor is
off,choose the the
user A or user B,
hold pressing “MEM”
for 3 seconds ,the
flash display will
show .
2.Press “SET” to
confirm deleting and
the monitor will turn
off.
3.If you don’t want to delete the
records, press to escape.
If you did not get the correct measurement, you can delete all
results by following below steps.
Delete the Records
START
STOP
4. If there is no record.
the right display will
show when press
“MEM”.
START
STOP
Recall the Records
1. Please choose the user A or user B when
the blood pressure monitor turns off, and
press the “MEM” to show the average of
the last 3 records.
The sign of "AVG"
will show in the right
corner.
2. Press the “MEM”
or “SET” to get the
record you want.
The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records
are pushed back one digit (e.g., 2 becomes 3, and so on), and the
last record (60) is dropped from the list.
It means the total
of records is 8,
the current is the No 2.
The corresponding
time is 10:38.
The corresponding
date is 11th October.
CAUTION
Date,time will
display alternately.
To Next Page
Loading...
Need help?
General
