Additional Safety and Operation Instructions
Before turning on the equipment, make sure
the voltage of the power source (110/127 or
220/230 V) is the same of the equipment.
Read the instructions carefully and familiarise
yourself with the controls and how to use the
equipment correctly.
Remember that the operator or user is
responsible for any accident or damage
involving other people and/or their property.
Don't operate the equipment when you're
wearing sandals or barefoot.
When you're using the equipment always
wear trousers and proper footwear.
Avoid operating the equipment in damp
environments and never use it in the rain.
Walk, don't run when you're using the
equipment.
Be careful where you step when working in
hilly areas - hillsides and mounds.
Always use the equipment in broad daylight
or good artificial light.
Turn off the equipment whenever you have
to cover ground and to go around obstacles.
If the equipment starts vibrating, unplug the
cord immediately. Check as soon as possible
why it's vibrating - that's a sure sign that it
needs to be adjusted or repaired.
Check regularly if all bolts are tight.
Before using the equipment, check if the
blade and the nylon filament spool are in
place. Do a visual inspection of the cutting
blade to see that it's not damaged or blunt.
Replace the blade and damaged or worn
bolts to ensure balance.
Check the cord and never use insulating tape
to repair it.
Never hose down your equipment to clean
it - use a damp cloth and neutral washing
produc
t.
Warning!
Whenver you are cleaning or servicing
your equipment, always make sure
that it’s turned off, that the blade isn’t
running and unplug the cord.
Never use a dual-end blade.
Technical Specifications
Motor Type Tension Power
Approx.
Rotation
Sound
Level
Weight Length
Width
(at skirt)
Height
(at skirt)
Cutting diameter
Blade Spool
Single phase Universal
110/127 V
220/230 V
1300 W 9000 rpm 87 dB (A) 5,8 kg 1,80 m 29 cm 16 cm 26 cm 35 cm
Extension Cord Right-use Table
Meters 10 m 20 m 30 m 40 m 50 m 60 m 70 m 80 m 90 m
Voltage 110 / 127 Volts
Gauge (Ø) A.W.G.
18 16 14 14 14 12 12 12 12
Gauge (Ø) mm
0.75 1.0 1.5 1.5 1.5 2.5 2.5 2.5 2.5
Voltage 220 / 230 Volts
Gauge (Ø) A.W.G.
18 18 16 16 16 14 14 14 14
Gauge (Ø) mm
0.75 0.75 1.0 1.0 1.0 1.5 1.5 1.5 1.5
To Next Page
Loading...
