treesse Shadow - Sensor-Related Alarms; Various Message Types

20
EN
Shadow minipool
Alarms
SENSOR-RELATED
MESSAGES
DISPLAY SCREEN DESCRIPTION OF SIGNALS AND POSSIBLE SOLUTIONS
Temperature
sensor not
accurate - M015
READY
RANGE
FLTR1
Problem description: The sensors connected to the water temperature
survey provide inaccurate indications (error margin of 2°C or 3°F).
Solutions: If the problem persists, contact Technical Service.
Temperature
sensor not
accurate - M026
Problem description: The sensors connected to the water temperature
survey give incorrect indications. The malfunction continues for at least
1 hour.
Solutions: Contact Technical Service.
Sensor fault -
Sensor A: M031,
Sensor B: M032
Problem description: The sensor connected to the temperature survey
or the circuit sensor do not work.
Solutions: Contact Technical Service.
VARIOUS TYPES
OF MESSAGES
DISPLAY SCREEN DESCRIPTION OF SIGNALS AND POSSIBLE SOLUTIONS
No signal
Problem description: The control panel does not communicate with
the electronic control unit.
Solutions: If the problem persists, contact Technical Service.
Development
software (beta)
Problem description: The control system is operating with a non-nal
software version.
Solutions: Contact Technical Service.
°F or °C are
replaced by °T
READY
RANGE
FLTR1
Problem description: The minipool is working with an incorrect con-
guration.
Solutions: Contact Technical Service.
* this message can be deleted from the top of the panel by pressing any key.
* this message can be deleted from the top of the panel by pressing any key.