12
1. The cam won't record after being turned on.
Solution:
A: Confirm whether a TF card has been inserted. Check the format of the card (Class
10, no bigger than 64GB).
B: Turn off the cam, remove the card and insert it again.
C: Format the card on the cam.
2. Abnormal video recording ending.
Solution:
A: Format the card.
B: Check whether the format of the memory card is correct.
C: Change to a correct qualified card to see if it is a card failure.
D: There are many poor memory cards in the market. The quality of these cards is bad
and will affect the use of the cam.
3. Screen goes black.
Solution:
The screen will go black if there is no operation on the cam within the set time interval
even during recording. You can press any button to wake the cam up.
4. Videos have no audio.
Solution:
Check whether the audio recording is turned on. You can check it via the microphone
sign on the screen. If not, press down button to active microphone recording.
5. Blurred videos.
Solution:
A:Remove the protective film on the lens and clean the lens
B: Remove the protective film on the screen
C: Due to the screen size and influence of resolution, there will be difference on visual
experience. So please transfer the videos to your computer and view them again.
D: Check the resolution of the cam. Choose higher resolution.
E: The video mode and photo mode are set independently. Please set the resolution of
video recording and photo shooting separately.
F: Check whether the format of the memory card is correct.
In the process of video recording
To Next Page
Loading...