-35-
CRT MK2
Maintenance and Cleaning
Before all work on the router table itself, pull the
mains cable out of the socket and not the router
cable out of the no-volt release switch.
Always keep the table clean. After operation,
clean the woodchip, dust and waste away from
the table.
Do not use PTFE spray on the plastic
components of the table.
Guarantee
■ The router table carries a manufacturers
guarantee in accordance with the conditions
on the enclosed guarantee card.
Recycling
■ Router table, accessories and packaging
should be sorted for environmentally friendly
recycling.
To Next Page
Loading...
