Need help?Do you have a question about the TREND CRT MK2 and is the answer not in the manual?
General| Brand | TREND |
|---|---|
| Model | CRT MK2 |
| Category | Power Tool |
| Language | English |
Guidelines for maintaining router cutters to prevent damage and ensure optimal performance.
General tips for safe and effective router operation and maintenance.
Guidance on identifying and matching router mounting holes with fixing screws for plate fitting.
Procedure for re-drilling the router base to fit the fixing plate accurately.
Specific instructions for Bosch POF routers regarding packing pieces and aperture enlargement.
Steps for re-drilling the fixing plate to match router base mounting holes.
Comprehensive guide to re-drilling both the fixing plate and the router base for secure mounting.
Details on fitting insert rings to reduce table aperture size for different cutters.
Guidance on the correct direction of workpiece feed relative to cutter rotation for optimal results.
How to adjust the lateral movement and position of the back fence for various routing tasks.
Using the workpiece support for stable guiding of workpieces during routing operations.
Methods for adjusting the cutting depth and height of the router cutter.
Details on connecting vacuum extraction hoses and adaptors to the router table.
Information on the optional large capacity extraction hose for improved dust extraction.
Using the optional profiling top guard for safety and visibility during routing.
Procedure for performing edge moulding operations using the back fence.
Techniques for grooving, fluting, and veining using the back fence.
Using the workpiece support for planing edges and full edge moulding.
Using the mitre fence for support in routing small workpieces or ends of large pieces.
Procedure for creating stopped mouldings using adjustable stops on the back fence.
Installing the lead-on pin for guiding workpieces and preventing kick-back.
Step-by-step guide for profiling workpieces using a lead-on pin and templates.
Tips for smooth, steady workpiece movement, avoiding burning, and managing operations.
Detailed steps for creating a shield using a template and router.
Moulding the edge of a shield using a ball bearing guided cutter and template.
Explanation of workpiece snatching and its dangerous consequences during routing.
Further guidance on safe profile routing, feed speeds, and cutter sharpness.
Information regarding the manufacturer's guarantee for the router table.
Guidance on environmentally friendly recycling of the router table and its packaging.
To Next Page
