TREND CRT MK2 - Floor Stand

To Next Page

To Previous Page

-18-

CRT MK2

x44

To adjust for

uneven floors,

loosen screws,

raise or lower

foot and re-

tighten.

Floor Stand - CRT/FS

Always mount the routing table on a

work table, bench or on the optional

floor stand.

IMPORTANT:

Please do not fit top screws

until CRT/MK2 is fitted to

the floor stand. Once

CRT/MK2 is placed onto

floor stand, the screws can

be fitted.

IMPORTANT:

Do not drag unit along floor. Please lift to move.

TREND CRT MK2 - Floor Stand - CRT;FS