TRENDnet TE100-MP1UN User Manual

Page 8
5.
6. Select the desired Print Server. If the Print Server does not show up, click the Refresh button.
7. Click Next to configure the IP Address screen.
 Select Obtain IP Address automatically if you’re LAN has a DHCP Server, otherwise select Use following IP address.
 For Use following IP address, enter an unused address from the range used on your LAN.
Use the same Subnet Mask and Default Gateway as PCs on your LAN.
8. Click Next.

TRENDnet TE100-MP1UN Specifications

General

Brand	TRENDnet
Model	TE100-MP1UN
Category	Print Server
Language	English