TRENDnet TEG-082WS - User Manual

TRENDnet User’s Guide
Cover Page

Summary

Switch Installation

Desktop Hardware Installation

Instructions for installing the switch on a desktop surface, considering environmental factors.

Rack Mount Hardware Installation

Guidelines for mounting the switch in an EIA standard-size equipment rack.

Basic IP Configuration

Accessing Switch Management Interfaces

Access Your Switch Management Page

Details on how to open the web management page and log in using default credentials.

Dashboard

System Configuration

System Management

L3 Feature (IPv4;IPv6)

Security Settings (SSL, SSH, Telnet)

Network Configuration

Physical Interface Settings

Configuring physical port parameters like speed, duplex, flow control, and jumbo frames.

Spanning Tree Protocol (STP)

VLAN Management

Configuring VLANs, including tagged, untagged, and port settings for network segmentation.

QoS (Quality of Service)

Managing network traffic quality by prioritizing packets using CoS, DSCP, and scheduling algorithms.

Security Features

Port Security and Access Control

Configuring port access control settings, MAC address limits, and 802.1X authentication.

ACL Configuration

DoS and DHCP Snooping

Tools and Utilities

Firmware Upgrade

Configuration Backup;Restore

Reboot and Factory Reset

Procedures for rebooting the switch or resetting it to factory default settings.

Troubleshooting

Quick Installation Guide Troubleshooting

Common troubleshooting steps and answers to frequently asked questions related to initial setup.

TRENDnet TEG-082WS Specifications