EasyManua.ls Logo

TRENDnet TEG-160WS - User Manual

TRENDnet TEG-160WS
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRENDnet Users Guide
Cover Page

Table of Contents

Other manuals for TRENDnet TEG-160WS

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEG-160WS and is the answer not in the manual?

Summary

Basic Installation

Initial Setup Steps

Steps to configure the switch's IP address and access the management page.

System Configuration

Access Switch Management Page

Instructions to log into the switch's web-based management interface.

Set System Information

Configure system name, location, and contact information.

Set IPv4 Settings

Configure the switch's IPv4 address, subnet mask, and gateway.

Set IPv6 Settings

Configure the switch's IPv6 address, default gateway, and link-local address.

Change Administrator Password and Add Accounts

Manage administrator password and create additional user accounts.

Enable HTTPS;SSL Management Access

Securely access the switch management page using HTTPS/SSL.

Spanning Tree Protocol (STP) Configuration

Configure Global STP Settings

Enable or disable STP and select the protocol version.

Configure STP Port Settings

Configure STP status and priority for individual switch ports.

Configure MSTP Settings

Configure Multiple Spanning Tree Protocol (MSTP) parameters.

Trunk Configuration (Link Aggregation)

Configure Port Trunk Settings

Set up link aggregation groups for increased bandwidth.

VLAN Configuration

Add, Modify, and Remove VLANs

Procedures for creating, changing, and deleting VLANs.

Voice VLAN Configuration

Create a Voice VLAN

Configure voice VLAN settings and auto-detection parameters.

Security Features

Configure Port Access Control

Implement 802.1X port-based network access control.

Add RADIUS Servers

Configure RADIUS server for remote authentication.

Add TACACS+ Servers

Configure TACACS+ server for centralized authentication.

DHCP Snooping Configuration

Switch Maintenance

Troubleshooting

Summary

Basic Installation

Initial Setup Steps

Steps to configure the switch's IP address and access the management page.

System Configuration

Access Switch Management Page

Instructions to log into the switch's web-based management interface.

Set System Information

Configure system name, location, and contact information.

Set IPv4 Settings

Configure the switch's IPv4 address, subnet mask, and gateway.

Set IPv6 Settings

Configure the switch's IPv6 address, default gateway, and link-local address.

Change Administrator Password and Add Accounts

Manage administrator password and create additional user accounts.

Enable HTTPS;SSL Management Access

Securely access the switch management page using HTTPS/SSL.

Spanning Tree Protocol (STP) Configuration

Configure Global STP Settings

Enable or disable STP and select the protocol version.

Configure STP Port Settings

Configure STP status and priority for individual switch ports.

Configure MSTP Settings

Configure Multiple Spanning Tree Protocol (MSTP) parameters.

Trunk Configuration (Link Aggregation)

Configure Port Trunk Settings

Set up link aggregation groups for increased bandwidth.

VLAN Configuration

Add, Modify, and Remove VLANs

Procedures for creating, changing, and deleting VLANs.

Voice VLAN Configuration

Create a Voice VLAN

Configure voice VLAN settings and auto-detection parameters.

Security Features

Configure Port Access Control

Implement 802.1X port-based network access control.

Add RADIUS Servers

Configure RADIUS server for remote authentication.

Add TACACS+ Servers

Configure TACACS+ server for centralized authentication.

DHCP Snooping Configuration

Switch Maintenance

Troubleshooting

TRENDnet TEG-160WS Specifications

General IconGeneral
Ports16 x 10/100/1000 Mbps
Switching Capacity32 Gbps
MAC Address Table8K
Form FactorRackmount
Forwarding Rate23.8 Mpps
PoENo
Switch TypeUnmanaged
Packet Buffer Memory512 KB
Input Frequency50/60 Hz
Operating Temperature0°C to 40°C
Jumbo Frame Support9K
Storage Temperature-20 – 70°C (-4 – 158°F)
Humidity10% to 90% (non-condensing)
Input Voltage100-240V AC
CertificationsCE, FCC
Dimensions280 x 175 x 44 mm

Related product manuals