© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-659BRV
7
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to the modem. Open your browser (e.g. Internet Explorer, Firefox, Chrome, Safari, or
Opera) and type in a URL (e.g.
http://trendnet.com) in the address bar.
2. Turn off your modem.
3. Disconnect the Ethernet cable (also called network cable) from your modem and your
computer.
4. Connect one end of a network cable to your router WAN port. Connect the other end
of the network cable to your Cable modem network port.
5. Connect one end of a network cable to one of your router LAN ports (1-4). Connect
the other end of the network cable to the computer Ethernet port (also called network
port).
6. Connect the included power adapter to your router Power Port and then to an
available power outlet. Push the On/Off Power Switch on your router to the “On”
(inner) position.
7. Turn on your modem.
8. Verify that the following front panel LED indicators on your router (Status
and
Wireless
is blinking green, WAN is solid green, and the LAN port for which your
computer is connected is solid green.
To Next Page
Loading...
Need help?
General
