© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-726EC
9
Wireless Utility Overview
WPS (Wi-Fi Protected Setup) Window
This window allows you to establish wireless connectivity using WPS to WPS supported device such as a wireless router/access point.
For information on how to connect using WPS, please refer to the section “Connect to your wireless network using WPS” on page 12.
WPS Push Button Method (Default)
Allows you to establish wireless
connectivity to a WPS supported device
such as a wireless router/access point
using the WPS Push Button method.
WPS PIN Method
Allows you to establish wireless
connectivity to a WPS supported device
such as a wireless router/access point
using the WPS PIN method.
Next
After selecting the WPS method to use,
click Next to continue to remaining
steps of the WPS connection process.