© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW751DR
IPv6 Connection Type – 6rd
WAN IPv6 Address Settings
Enable Hub and Spoke Mode: Tick the check box to enable the hub and spoke
mode.
6rd Configuration: Select the 6rd configuration option. Options to choose from
are 6rd DHCPv4 option and Manual Configuration.
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value.
IPv4 Address Mask Length: Enter the IPv4 mask length.
Assigned IPv6 Prefix: Displays the IPv6 prefix.
6rd Border Relay IPv4 Address: Enter the 6rd border relay IPv4 address.
Primary DNS Server: Enter the primary IPv6 DNS server address.
Secondary DNS Server: Enter the secondary IPv6 DNS server address.
LAN IPv6 Address Settings
LAN IPv6 Address: This field displays the LAN IPv6 address.
LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local
address.
Address Auto-configuration Settings
Enable automatic IPv6 address assignment: Tick the check box to enable
automatic IPv6 address assignment.
Auto-configuration Type: The available IPv6 auto configuration types are
SLAAC+RDNSS, SLAAC+Stateless DHCP, and Stateful DHCPv6.
Router Advertisement Lifetime: Displays the router advertisement lifetime in
minutes. This field appears when SLAAC+RDNSS or SLAAC+Stateless DHCP
is selected.
IPv6 Address Range (Start): Enter the start IPv6 address in the range. This
field is only available when Stateful DHCPv6 is selected.
IPv6 Address Range (End): Enter the end IPv6 address in the range. This field
is only available when Stateful DHCPv6 is selected.
IPv6 Address Lifetime: Displays the IPv6 address lifetime in minute. This field
appears when Stateful DHCPv6 is selected.
To Next Page
Loading...
Need help?
General
