3. The Setup Wizard will automatically appear. This section determines what method
the router will use to interface with your ISP service. Select the ADSL Internet
connection type provided by your ISP and click Next.
Note: If the Setup Wizard does not automatically appear, click Setup Wizard (the
top button on the left tab).
Note: It is strongly recommended to contact your ISP to verify all required settings
for one of the options listed on page 6. The options listed on page 6 match the
settings options available to choose from
4. The Setup Wizard can automatically detect your VPI/VCI and Data Encapsulation
settings of your ADSL connection. Select Auto-detect and click Next.
Note: If you encounter any issues with the Auto-Detect feature on the wizard, you
can click “Skip Scan”, and configure your ADSL connection settings manually.
5. Once the wizard detects your VPI/VCI settings you can verify if the values are correct
and click Next to continue.
6. The following screen will appear next, depending the ADSL connection type you
selected, you may need to enter additional information such as your PPPoE/PPPoA
user name and password information provided by your ISP static IP. Enter any
additional information required by your ISP for your ADSL connection and click Next.
To Next Page
Loading...
Need help?
General
