TRENDnet TEW21BRM User Manual

© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-721BRM
27
 Default Gateway: Enter the default gateway provided by your ISP.
 DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
 DNS Override Allowed: Select whether to enable or disable DNS override.
 DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.
Dynamic / Static
If you select Dynamic IP, the screen below is displayed.
 State of Connection: Select whether to enable or disable this connection.
 IP Protocol Version: Select the IP protocol version.
 Name: Enter your desired connection name.
 NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
 DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
 DNS Override Allowed: Select whether to enable or disable DNS override.
 DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
 MAC Address: Displays the cloned MAC address. Click Clone MAC to clone the MAC
address of your computer.
 Option 125: Select whether to enable or disable Option 125.
 Option 60 Vendor ID: Enter option 60 vendor ID.
 Option 61 IAID: Enter option 61 IAID.
 Option 61 DUID: Enter option 61 DUID.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.
 Unicast DHCP-Request: Check this box to enable unicast DHCP request function.
Bridge Mode
If you select Bridge mode, the screen below is displayed.
 State of Connection: Select whether to enable or disable this connection.
 IP Protocol Version: Select the IP protocol version.
 Name: Enter your desired connection name.

TRENDnet TEW21BRM Specifications

General

Brand	TRENDnet
Model	TEW21BRM
Category	Network Router
Language	English