TRI tool 301SP - Loss of Air Power; Loss of Hydraulic Power; Tool Bit does not Reach the Work; Hydraulic Motor does not Star

Model 301SP Tube Squaring Machine
92-0579 Rev. 190612 29
Problem: Loss of Air Power
The air supply pressure is too low.
Theairlterisplugged.
Theairlinesizeisinsufcient.
The air line is too long.
Problem: Loss of Hydraulic Power
The hydraulic supply pressure is too low.
Thehydrauliclterisplugged.
Thehydrauliclinesizeisinsufcient.
The hydraulic line is too long.
Problem: Tool Bit does not Reach the Work
Incorrect tool blocks are installed for the size of the pipe or tube
Incorrect tool bit is installed.
Problem: Hydraulic Motor does not Star
The hydraulic power supply is shut off.
The hydraulic motor is damaged and will not run free.