CRYSTAL
28
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Calibration and press the ENTER but-
ton to enter the next menu.
• Press the UP/DOWN button to scroll through the menu, then select Password and press ENTER to con-
firm.
• Use the arrow keys to enter the password 050 and press ENTER to confirm.
• Once you have entered your password, you can set the values for Pan, Tilt, Color1, Gobo1, Prism and Focus.
Press the UP/DOWN button to scroll through the menu, select one of the functions mentioned above
and press ENTER to confirm your choice.
• Use the arrow buttons to enter the desired value, then press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
Reload Default
Select this function to reset the unit to factory settings:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Reload Default and press the ENTER button
to enter the next menu.
• Press the UP/DOWN button to select the favourite recovery mode Basic Reload/Program Reload/ Private Re-
load/All Reload, then press the ENTER button to confirm.
• Press the UP/DOWN button to select ON or OFF, then press the ENTER button to confirm.
Temperature C/F
Select this function to set the temperature unit measurement shown on the display:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN to scroll through the menu, select the Set icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN to scroll through the menu, select UI Set, and press the ENTER button to enter the
next menu.
• Press the UP/DOWN button to scroll through the menu, select Temperature C/F and press ENTER to con-
firm.
• Press the UP/DOWN button to select the unit of measure Celsius/Fahrenheit and press the ENTER button
to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
To Next Page
Loading...