TriBrer APL-2 - OTDR Configuration Settings

Click on "OTDR Settings" to show the OTDR settings menu. There are 10 options in the menu, and
click on each one can set the parameters. Click on "Confirm and exit" to save the changes. Click on
"Restore" to restore system defaults. After finishing setting, click on "OTDR Settings" again to quit.
OTDR- OTDR Settings
60Km 2.5us 30s
1310nm 1550nm
Pulse Time Mode
OTDR
Settings
Wavelength
Range
Average
measure
Real-time
measure
Manual
Events
Analyse
Measure
settings
Back to
menu
Save/File
Refractive rate
Scatter coefficient
Optical detect
Fiber section detect
0.05
Reflection threshold
65.0dB
End threshold
3.0dB
On
Sampling resolution
Standard
Real-time analyse
Off
Splice loss
Off
International units
m
OTDR settings
OTDR Settings
Measure
settings
2017-01-01
21:35
100%
Version
S_OTDR_V0.0.0
P10