The installer of the Rack Mountable Power Distribution Unit (RPDU) should read the installation
and operating manual before installing this product.
1.1.1 Unpacking and Initial Inspection
1. Inspect the package for damage or signs of mishandling before unpacking the
unit(s).
2. Open the package carefully, and avoid using sharp objects to open the box.
3. Check the Unit for any shipping damages.
If the Unit is damaged, immediately file a damage claim with the shipping agency and
forward copy to:
Trilogy, Inc.
27068 La Paz Road # 701
Aliso Viejo, CA 92656
Tel: (888) 514-4200
1.1.2 Handling
Packaging - The Rack Mount Power Distribution Unit (RPDU) is packed in a protective
cardboard box.
Check size and weight - Refer to the cabinet drawings furnished with the unit for size and
weight information. The Unit is designed to be installed in a 19” rack.
Plan the route – The RPDU should be moved to the final location on rolling cart.
Move and set in place – In order to prevent physical injury or damage to the Unit, handle
with care. A lift should be used to set the unit in the rack.
To Next Page
Loading...