5.0 Corrective Maintenance (Repair)
Even the most reliable equipment may fail. TRILOGY support is at your service to assure fast
repair of your unit and minimum downtime of your installation.
ONLY QUALIFIED SERVICE PERSONNEL SHOULD PERFORM MAINTENANCE
ON THE RACK MOUNT POWER DISTRIBUTION UNIT SYSTEM.
Standard electrical troubleshooting procedures should be used to isolate problems in the
unit. If there are questions, don’t hesitate to contact TRILOGY International support.
Repair or replacement of standard items, such as circuit breakers, fuses, receptacles and
indicator lights can be either handled by qualified electricians or referred to TRILOGY
International support.
Repairs related to the monitoring system should be referred to TRILOGY International
support.
To contact TRILOGY International support for information or repair service in the
USA,
call 1-888-514-4200.
5.1 Preventive Maintenance (Inspection & Cleaning)
Air circulation through the cabinet may cause dust to accumulate on internal components.
Cleaning should be done as necessary during electrical inspections.
Annual general system inspections, cleaning, and operation checks are recommended to ensure
system performance and long service life.
ONLY QUALIFIED SERVICE PERSONNEL SHOULD PERFORM MAINTENANCE
ON THE RACK MOUNT POWER DISTRIBUTION UNIT SYSTEM. ALL VOLTAGE
SOURCES TO THE UNIT MUST BE DISCONNECTED BEFORE INSPECTING OR
CLEANING WITHIN THE CABINET.
Inspection Schedule
• It is difficult to establish a schedule for periodic cleanings since conditions vary from
site to site. Inspections after the first 24 hours, 30 days and 6 months of operation
should help determine a pattern for the inspection schedule.
• Electrical connections and component mountings should be inspected after the first
24 hours, 30 days, and 6 months of operation. Inspections should be conducted
annually thereafter.
• Ventilation openings and grilles should be inspected and cleaned every six months
to one year.
• A complete inspection and operational checkout should be performed annually
• TRILOGY International support offers a complete range of preventive maintenance
services. These include thorough equipment performance checks, and calibration of
electronics. Contact TRILOGY International support in the USA (1-888-514-4200)
for details.
To Next Page
Loading...