TRIMOS V300+ User Manual

TRIMOS SA Av. de Longemalle 5 CH 1020 Renens Switzerland
Tel ++ 41 21 633 01 01 Fax ++41 21 633 01 02 office@trimos.ch http://www.trimos.ch
Page 1
User’s manual
V300+ / V600+ / V1000+
Version N°2.0 – E

TRIMOS V300+ Specifications

General

Measuring Range	0-300 mm
Display	LCD
Power Supply	Rechargeable battery
Resolution	0.1 µm
Storage Temperature	-10 to 60 °C
Dimensions	Unknown

Summary

Description of the Instrument

Display Functions

Distinctive Characteristics

Specifications

Delivery Contents

Unpacking and Installation

Getting Started

Replacing the Battery Pack

Adjusting Measuring Pressure

Adjustment of Probe Suspension

Main Functions

Secondary Functions and Initialization

How to Start Up and Measure

13.1 Setting the Probe Constant

Procedure to set the probe constant for measuring reversed surfaces or diameters.

13.2 Measuring Heights

Steps for taking reference and measuring heights on the instrument.

13.3 Measuring Diameters and Centerlines

Guide to measure diameters and centerlines using the instrument.

13.4 Measuring with Min/Max Mode

Instructions for using the instrument's min and max measurement modes.

13.5 Measuring with Delta Mode

How to perform measurements using the Delta mode on the instrument.

13.6 Measuring of Squareness

Steps for measuring squareness using the instrument and a dial indicator.

13.7 Measuring with Two References

Procedure for taking measurements using two reference points on the instrument.

Initialization of Printing Mode

Printer Setup and Operation

AC Adaptor and External Contact

RS232C Connector Details

Remote Control Functions

Optional Accessories Overview

Maintenance and Care

Transport and Repairs

Worldwide Distributors