Need help?Do you have a question about the TRIMOS V7 and is the answer not in the manual?
General| Brand | TRIMOS |
|---|---|
| Model | V7 |
| Category | Measuring Instruments |
| Language | English |
General instructions to prevent damages due to wrong manipulation.
Explanation of security symbols used in the manual.
Precautions regarding electrostatic discharge, fluids, ventilation, and operational environment.
Step-by-step instructions for setting up the instrument after unpacking.
Procedure for setting the reference position and determining the probe constant.
Instructions for performing height measurements, including downward and upward measurements.
Procedure for measuring diameters and centreline distances.
How to use Min, Max, and Delta modes for surface measurement analysis.
Recording and managing probe constants for accurate measurements.
Measuring distances and centreline distances, excluding diameters.
Measuring angles and cone shapes using specific accessories.
Programming and using tolerance limits for measurements and series production.
Using an electronic probe for perpendicularity measurements and understanding the output values.
Procedure for acquiring points along the Z-axis and X-axis, including tilting.
Translating and aligning the coordinate system for 2D measurements.
Performing and analyzing various measurements like angles and distances.
Creating a new measurement sequence by recording steps and adding comments.
Loading and executing previously recorded measurement sequences.
Opening and analyzing batches of measurement results.
Displaying and understanding statistical values like range, mean, and standard deviation.
Procedure for transferring data to a PC via USB B connection.
Procedure for transferring data via RS232 connection to printers or PCs.
Configuring the Smart Reverse function for efficient diameter measurement.
To Next Page
