10
Standard Extender Kit Installation
Model B127A-1A1-BDBD
Notes:
1) Test to ensure the entire installation works properly before pulling cables through
ceilings/walls.
2) To achieve maximum distance and performance, use 24 AWG solid wire Cat6
cable. Using stranded-wire Cat6 cable, or cable with a gauge (AWG) size higher
than 24 AWG, will result in shorter extension distance. Higher gauge cabling,
such as 26 AWG, has a more limited transmission capability than lower gauge
cabling. All Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid-wire
cabling.
3) The installation diagram shows a B127A-1A1-BDBD unit.
4) External power is not required for remote receiver units due to Power over Cable
(PoC) technology incorporated in the transmitter units.
B127A-1A1-BDBD extender kit
LOCAL / TRANSMITTER REMOTE / RECEIVER
Micro-USB cable
Toslink cable
Up to 230 ft. Cat6 solid cable at 4K/30 Hz
Up to 15 ft. DisplayPort cable at 4K/30 Hz
Up to 15 ft. HDMI 2.0 cable at 4K/30 Hz
DisplayPort
Source
Monitor
TV
Up to 230 ft. (70 m) at 4K/30 Hz
IR Control
Pad
IR
SENSOR
IR Control
Pad
IR
SENSOR
USB
MOUSE
USB
KEYBOARD
21-03-131 933D25 RevC.indd 1021-03-131 933D25 RevC.indd 10 3/22/2021 3:19:57 PM3/22/2021 3:19:57 PM
To Next Page
Loading...
Need help?
General
