4
Before performing any of the following procedures, ensure that power
is removed from the DC circuit.
Read the installation instructions before connecting the system to the
power source.
To prevent bodily injury when mounting or servicing this unit in a rack,
you must take special precautions to ensure that the system remains
stable. The following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the
only unit in the rack.
When mounting this unit in a partially filled rack, load the rack
from the bottom to the top with the heaviest component at the
bottom of the rack.
If the rack is provided with stabilizing devices, install the
stabilizers before mounting or servicing the unit in the rack.
This unit might have more than one power supply connection. All
connections must be removed to de-energize the unit.
Only trained and qualified personnel should be allowed to install,
replace, or service this equipment.
When installing or replacing the unit, the ground connection must
always be made first and disconnected last.
To Next Page
Loading...
Need help?
General
