5
Voltages that present a shock hazard may exist on Power over Ethernet
(PoE) circuits if interconnections are made using uninsulated exposed
metal contacts, conductors, or terminals. Avoid using such
interconnection methods, unless the exposed metal parts are located
within a restricted access location and users and service people who
are authorized within the restricted access location are made aware of
the hazard. A restricted access area can be accessed only through the
use of a special tool, lock and key or other means of security.
No user-serviceable parts inside. Do not open.
This equipment must be grounded. Never defeat the ground conductor
or operate the equipment in the absence of a suitably installed ground
conductor. Contact the appropriate electrical inspection authority or
an electrician if you are uncertain that suitable grounding is available.
To Next Page
Loading...
Need help?
General
