Output nominal
voltage
120V nominal
Output voltage
regulation
Maintains PWM sine wave output voltage of 120 VAC (+/-5%)
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection Circuit breaker
Outlet quantity / type Includes 2 AC outlets (NEMA 5-15R)
INPUT
Recommended
Electrical Service
Requires 12VDC input source capable of delivering 50A for the required duration (when used at full continuous
capacity). For automotive applications, professional hardwire installation with 100A battery system fusing is
recommended.
Maximum input amps
/ watts
Full continuous load - 50A at 12VDC, No load - 2.2A at 12VDC
Input connection type Set of 2 DC input terminals
Input cord length
details
User supplies cabling. 4 gauge or larger recommended.
Voltage compatibility
(VDC)
12
BATTERY
DC system voltage
(VDC)
15
LEDS ALARMS & SWITCHES
Switches Lighted on/off power switch, plus 2 conductor 3.5 mm port for connecting remote switch - user supplies switch,
3.5mm plug and cable.
Front panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
PHYSICAL
Shipping Dimensions
(HWD/in)
11.63 x 9.5 x 9.5
Shipping Dimensions
(HWD/cm)
29.5 x 24.13 x 24.13
Shipping weight (lbs) 17
Shipping weight (kg) 7.71
Unit Dimensions
(HWD/in)
7 x 7 x 10
Unit Dimensions
(HWD/cm)
17.8 x 17.8 x 25.4
Unit weight (lbs) 15
Unit weight (kg) 6.8
Cooling method Convection
Material of
construction
Polycarbonate
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
To Next Page
Loading...
Need help?
General
