To Next PageTo Next Page
Need help?Do you have a question about the Tripp Lite SmartOnline 5KVA and is the answer not in the manual?
General| Model | SmartOnline 5KVA |
|---|---|
| Power Capacity | 5kVA / 4.5kW |
| Output Frequency | 50/60 Hz |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Input Connection Type | Hardwire |
| Battery Type | Sealed Lead Acid (SLA) |
| Form Factor | Tower |
| Waveform Type | Sinewave |
| Communication Ports | USB |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 0-95% non-condensing |
| Battery Run Time (Full Load) | 5 minutes |
| Typical Battery Recharge Time | 4 hours |
| Storage Temperature | -15°C to 45°C (5°F to 113°F) |
Guidelines for safely placing the UPS unit to ensure proper ventilation and prevent damage.
Precautions for connecting the UPS power supply, including grounding and single-phase rating.
Safety advice for connecting external electronic equipment to the UPS.
Warnings regarding maintenance procedures, emphasizing no user-serviceable parts inside.
Safety precautions for handling UPS batteries, including risks of shock and disposal.
Instructions for installing the UPS system in a standard 4-post rack.
Optional procedure for mounting the UPS in a 2-post rack using a specific kit.
Explanation of the UPS front panel buttons, LCD display, and status LEDs.
Overview of rear panel connectors, ports, breakers, and expansion slots.
Step-by-step guide for connecting the UPS to power and equipment.
Safety guidelines and requirements for making hardwiring connections.
Wiring procedures for connecting PDUs via terminal strips (IEC and Hardwire).
Details on RS-232, USB, and optional SNMP/Web card connections.
Information on Emergency Power Off (EPO) port and external battery connections.
Steps for safely removing the UPS power module and detachable PDU for maintenance.
Explains front panel LED indicators and different UPS operating modes.
Describes UPS operating modes like Online, Economy, Battery, and Bypass.
Covers UPS startup sequence and self-test diagnostics with error messages.
Guide to accessing and navigating the UPS setup menu for configuration.
How to change the UPS password and select the screen display language.
Configures startup behavior and battery charge current settings.
Procedure for scheduling and performing battery discharge tests.
Adjusting output voltage and enabling frequency converter modes.
Settings for energy-saving ECO and protective Industrial modes.
Viewing and clearing UPS fault history logs and event records.
Displays shown during UPS self-diagnosis checks upon startup.
Explains UPS shutdown, overload, and bypass status messages.
Specific conditions triggering UPS shutdown and their display messages.
Step-by-step guide for safely replacing the internal UPS batteries.
Recommendations for storing the UPS and recharging batteries during storage.
How to obtain technical support and return products for service.
Details of the product's limited warranty coverage and exclusions.
Information on how to register the product warranty online.
