3
3. Features
• 33,000 BTU of cooling power
• Variable-speed, DC-inverter-driven compressor and microprocessor-controlled electronic expansion valve (EEV) enable precision cooling
adjustments
• Soft-start feature limits inrush current to prevent introduction of line noise, voltage disruptions and potential circuit overloads
• Self-contained, zero-maintenance unit atomizes condensate and expels it through the exhaust air stream—no floor drain, water collection
tank, external condenser, refrigerant piping, ductwork or plumbing required when used in typical conditions
• Convenient LCD control panel and network interface enable local and remote monitoring and control of temperature, fan speed, alarms
and logging via front-panel buttons, SNMP, Web, telnet or Modbus
• Row-based airflow path maximizes hot-aisle/cold-aisle efficiency and cooling predictability by supplying cold intake air high in the cold aisle
and removing hot equipment exhaust air low from the hot aisle
• Eco-friendly R410a refrigerant meets environmental standards worldwide
• Nominal 208-240V AC Input, 50/60 Hz frequency compatibility
To Next Page
Loading...
