EasyManua.ls Logo

Tripp Lite SUINT3000RTXL2U User Manual

Tripp Lite SUINT3000RTXL2U
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner’s Manual
SmartOnline
®
Rack/Tower On-Line UPS System
Model: SUINT3000RTXL2U
(Series Number: AG-0264)
Not suitable for mobile applications.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved. SmartOnline
®
is a trademark of Tripp Lite.
1. Overview 2
1.1 Package Contents 2
1.2 Optional Accessories 2
2. Important Safety Instructions 2
3. UPS Circuit Block Diagram 3
4. Installation 4
4.1 Mounting (Rack) 4
4.2 Mounting (Tower) 6
4.3 Connection and Start-Up 6
4.4 Optional Connections 7
5. Operation 10
5.1 Front Panel Switches 10
5.2 Advanced Operational Settings 10
5.3 Power Strategy Selection Options 11
5.4 Front Panel Indicator Lights 12
5.5 Rear Panel 13
5.6 Communications 14
5.7 Configuration Options via WEBCARDLX 15
6. Troubleshooting 18
7. Battery Replacement 19
8. Storage and Service 22
8.1 Storage 22
8.2 Service 22
9. Regulatory Compliance 22
Español 23
Français 45
Русский 67
18-09-247-933652.indb 1 2/13/2019 3:27:24 PM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Tripp Lite SUINT3000RTXL2U and is the answer not in the manual?

Tripp Lite SUINT3000RTXL2U Specifications

General IconGeneral
TypeLine-Interactive
Power Capacity3000 VA / 2700 W
Nominal Input Voltage120V
Nominal Output Voltage120V
Warranty2 Years
Output Voltage Regulation (Line Mode)+/- 5%
Output Voltage Regulation (Battery Mode)+/- 5%
Input Frequency50/60 Hz
Output Frequency50 / 60 Hz
Battery TypeSealed Lead Acid (SLA)
Typical Recharge Time8 hours
Form FactorRack/Tower
Communication InterfaceUSB, DB9 Serial

Summary

Important Safety Instructions

Save These Instructions

Crucial warning to retain manual for safety during installation and operation.

UPS Location Warnings

Guidelines for proper indoor placement and environmental conditions for UPS.

Installation Procedures

Connection and Start-Up

Procedures for connecting the UPS to power and initial startup.

UPS Operation

Front Panel Switches

Explains the functions of the UPS front panel buttons (ON/TEST, OFF).

Front Panel Indicator Lights

Explains the meaning of various LEDs on the UPS front panel.

Configuration Options via WEBCARDLX

Troubleshooting UPS Issues

Interpreting LED Fault Indicators

Explains LED states and error codes for diagnosing UPS problems.

Battery Replacement Guide

Battery Warnings and Precautions

Cautions regarding electrical shock, burns, and battery handling.

Battery Replacement Procedure

Step-by-step instructions for replacing the UPS battery pack.

Storage and Service Information

Related product manuals