Triton 1010W Compact User Manual

4
GB
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries
Caution!
Be aware of kickback
Class II construction (double insulated for additional protection)
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Technical Abbreviations Key
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Specification
Model no: JOF001
Voltage: 220V - 240V~ 50/60Hz
Power: 1010W
No-load speed: 8,000 to 21,000 min
-1
variable
Depth adjustment: 1) Micro Winder
2) Free Plunge
Collet: 1/2" 6 & 12 mm
Bit changes: Through-base, single spanner action.
Auto shaft lock
Guide: Extended baseplate with adjustable fence
Protection class:
Ingress protection: IP20
Net weight: 3.9kg
Sound and vibration information:
Sound pressure L
PA
: 85.5dB(A)
Sound power L
WA
: 96.5dB(A)
Uncertainty K: 3dB
Weighted vibration a
h
: 5.958m/s
2
Uncertainty k: 1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.
As part of our ongoing product development, specifications of Triton products may
alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop
using the tool immediately and check the ear protection is correctly fitted and provides the
correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long-term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Original Instructions
Introduction
V Volts
~ Alternating current
A Ampere
n0 No load speed
Hz Hertz
W, kW Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
925837_Manual.indd 4 18/05/2017 14:31

Triton 1010W Compact Specifications

General

Brand	Triton
Model	1010W Compact
Category	Power Tool
Language	English