Triton mof001 Operating Instructions

6
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
As part of our ongoing product development, specifications of Triton
products may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable,
even with ear protection, stop using the tool immediately and check the ear
protection is correctly fitted and provides the correct level of sound attenuation
for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration
and use anti-vibration gloves. Do not operate the tool with hands below a
normal comfortable temperature, as vibration will have a greater effect. Use
the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use
for the tool in normal working conditions. A poorly maintained, incorrectly
assembled, or misused tool, may produce increased levels of noise and
vibration. www.osha.europa.eu provides information on sound and vibration
levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
Specification
Model number: MOF001
Rating: 220V - 240V~ 50/60Hz
Power: 1400W
No-load speed: 8000 to 21,000 min
-1
variable
Collet:
1
⁄2" &
1
⁄4"
Maximum cutter diameter: 55mm / 50mm
(When used with WX7RT001)
Plunge adjustment: 1) Free Plunge
2) Table Height Winder
3) Micro Winder
Plunge Range: 59mm
Insulation class:
Net weight: 5.97kg / 13.16lbs
Sound and vibration information:
Sound pressure L
PA
: 84.1dB(A)
Sound power L
WA
: 95.1dB(A)
Uncertainty K: 0.567dB
Weighted vibration a
h
: 6.285m/s
2
Uncertainty K: 0.74m/s
2
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
Caution!
Be aware of kickback!
V Volts
~ Alternating current
A Ampere
n
O
No load speed
Hz Hertz
W, kW Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
Technical Abbreviations Key
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Thank you for purchasing this Triton tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual
carefully to ensure you fully understand the instructions. Ensure all users of the tool
read and fully understand this manual.
Introduction
Original Instructions
813291_Z1MANPRO1_AUS.indd 2 13/12/2016 08:54

Triton mof001 Specifications

General

Brand	Triton
Model	mof001
Category	Power Tool
Language	English