How to fix the top edge or back of the paper being dirty on my Triumph Adler P-3020 MFP All in One Printer?
If the top edge or back of the paper is dirty when using your Triumph Adler All in One Printer, the inside of the machine may be dirty. Clean the inside of the machine.
Why are my Triumph Adler P-3020 MFP printouts fuzzy?
If your Triumph Adler All in One Printer printouts are fuzzy, the machine may be used in very humid conditions. Use in a location that has suitable humidity.
What does it mean when my Triumph Adler P-3020 MFP All in One Printer says 'Close front cover'?
If your Triumph Adler All in One Printer displays 'Close front cover', there is a cover that is open. Close the cover indicated on the operation panel.
What does it mean when my Triumph Adler P-3020 MFP says 'Check cassette 1'?
If your Triumph Adler All in One Printer displays 'Check cassette 1', a paper lift error has occurred in the paper source's cassette. Pull out the cassette for the paper source displayed (either the paper cassettes or optional paper feeders) and check if the paper is loaded correctly.
How to fix vertical streaks on prints from my Triumph Adler P-3020 MFP?
If vertical streaks appear on prints from your Triumph Adler All in One Printer, the slit glass may be dirty, so clean the slit glass. Alternatively, the inside of the machine may be dirty, so check the toner container and replace it if necessary.
Why are my Triumph Adler P-3020 MFP printouts too light?
Your Triumph Adler All in One Printer printouts may be too light because the machine is in Manual Density mode (select the correct density level), the toner is not distributed evenly within the toner container (shake the toner container from side to side about several times), there is a message indicating the addition of toner (replace the toner container), the paper is damp (replace the paper with new paper), EcoPrint mode is enabled (disable EcoPrint mode), or the paper type setting is incorrect (make sure the paper type setting is correct for the paper being used).
What does it mean when my Triumph Adler All in One Printer says 'Load paper in MP Tray'?
If your Triumph Adler All in One Printer displays 'Load paper in MP Tray', it means the paper of the selected size is not loaded in the multi-purpose tray. Load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
What does it mean when my Triumph Adler P-3020 MFP All in One Printer says 'Load paper in cassette 1'?
If your Triumph Adler All in One Printer displays 'Load paper in cassette 1', it means the indicated cassette is out of paper. Load paper.
What does it mean when my Triumph Adler P-3020 MFP All in One Printer says 'Close Document Processor'?
If your Triumph Adler All in One Printer displays 'Close Document Processor', it means the document processor is open. Close the document processor. It could also mean that the top cover of the document processor is open, so close the top cover of the document processor.
What does it mean when my Triumph Adler All in One Printer says 'Add toner'?
If your Triumph Adler All in One Printer displays the message 'Add toner' and the attention LED is lit, replace the toner container.
General| Brand | Triumph Adler |
|---|---|
| Model | P-3020 MFP |
| Category | All in One Printer |
| Language | English |
Explains safety warnings and symbols used in the guide.
Basic steps to make copies using the machine's Start key.
Instructions for printing via network or USB connection.
Safety precautions for handling toner and waste toner boxes.
Covers fundamental operations like copying, printing, and sending.
Details various functions available for copying.
Explains functions for sending scanned originals.
Explains how to check job status, history, and cancel jobs.
Covers machine settings configurable via the operation panel.
Describes cleaning procedures and toner replacement.
Offers solutions for common machine problems and errors.
Explains user login administration and job accounting features.
Describes how to log in and out of the machine for user authentication.
Provides step-by-step instructions for performing basic copying.
Outlines the process for sending scanned images.
Instructions on how to cancel print or send jobs in progress.
Displays the status of jobs being processed or waiting to print.
Describes how to pause and resume printing/waiting jobs.
Instructions on how to cancel print or send jobs in progress.
Adjusts printing quality and performs machine maintenance.
Configures network settings like LAN interface and TCP/IP.
Sets up security functions like IPSec, SSL, and SNMPv3.
Describes cleaning procedures for the glass platen and document processor.
Provides instructions for replacing the toner container.
Offers solutions for common machine issues like print quality and paper jams.
Explains how to handle alphanumeric error messages displayed on the panel.
Guides on how to remove jammed paper from different locations.
Specifies how user access is administered and how to add/manage users.
Manages copy/print counts by assigning IDs to accounts.
To Next Page