Why are my Triumph Adler All in One Printer printouts not clear?
If your Triumph Adler All in One Printer printouts are not clear, the appropriate image quality for the original was not chosen. Select appropriate image quality.
What to do if my Triumph Adler P-3020 MFP All in One Printer printouts are wrinkled or curled?
If printouts from your Triumph Adler All in One Printer are wrinkled or curled, the paper may be damp. Replace the paper with new paper.
Why are images skewed on my Triumph Adler P-3020 MFP?
Images are skewed on your Triumph Adler All in One Printer because the originals are not placed correctly. When placing originals on the platen, align them with the slit glass. When placing originals in the document processor, align the original width guides securely before placing the originals. Also, the paper may not be loaded correctly, so check the position of the paper width guides.
What to do if my Triumph Adler P-3020 MFP All in One Printer prints are dirty?
If your Triumph Adler All in One Printer prints are dirty, the platen or the document processor may be dirty. Clean the platen or the document processor.
Why is my Triumph Adler P-3020 MFP not feeding originals?
If your Triumph Adler All in One Printer is not feeding originals, it may be because the originals are not placed correctly. When placing originals in the document processor, align the original width guides securely before placing the originals.
What to do if my Triumph Adler P-3020 MFP All in One Printer copies have a moire pattern?
If your Triumph Adler All in One Printer copies have a moire pattern (dots grouped together in patterns and not aligned uniformly) and the original is a printed photograph, set the image quality to [Photo].
Why are blank sheets ejected from my Triumph Adler P-3020 MFP?
If blank sheets are ejected from your Triumph Adler All in One Printer, it may be because the originals are not loaded correctly. When placing originals on the platen, place them face-down and align them with the slit glass. When placing originals in the document processor, place them face-up.
Why are my Triumph Adler P-3020 MFP All in One Printer printouts too dark?
If your Triumph Adler All in One Printer printouts are too dark, it could be because the machine is in Auto Density mode (set the correct density level for auto density) or the machine is in Manual Density mode (select the correct density level).
What to do if my Triumph Adler P-3020 MFP All in One Printer cannot print?
If your Triumph Adler All in One Printer cannot print, ensure that the power cord is plugged into an AC outlet and the power switch is turned on. Check that the printer cable is securely connected and that the machine was powered on after connecting the printer cable. If the print job is paused, press [Resume] (the Left Select key) to resume printing. If there is an error message displayed, follow the corresponding procedure.
What to do if my Triumph Adler P-3020 MFP paper often jams?
If your Triumph Adler All in One Printer paper often jams, make sure you load the paper correctly. Also, if the paper is of the supported type but is in poor condition, remove the paper, turn it over, and reload it. Replace the paper with new paper if it is curled, folded, or wrinkled. Finally, remove any jammed paper from the machine.
General| Brand | Triumph Adler |
|---|---|
| Model | P-3020 MFP |
| Category | All in One Printer |
| Language | English |
Explains safety warnings and symbols used in the guide.
Basic steps to make copies using the machine's Start key.
Instructions for printing via network or USB connection.
Safety precautions for handling toner and waste toner boxes.
Covers fundamental operations like copying, printing, and sending.
Details various functions available for copying.
Explains functions for sending scanned originals.
Explains how to check job status, history, and cancel jobs.
Covers machine settings configurable via the operation panel.
Describes cleaning procedures and toner replacement.
Offers solutions for common machine problems and errors.
Explains user login administration and job accounting features.
Describes how to log in and out of the machine for user authentication.
Provides step-by-step instructions for performing basic copying.
Outlines the process for sending scanned images.
Instructions on how to cancel print or send jobs in progress.
Displays the status of jobs being processed or waiting to print.
Describes how to pause and resume printing/waiting jobs.
Instructions on how to cancel print or send jobs in progress.
Adjusts printing quality and performs machine maintenance.
Configures network settings like LAN interface and TCP/IP.
Sets up security functions like IPSec, SSL, and SNMPv3.
Describes cleaning procedures for the glass platen and document processor.
Provides instructions for replacing the toner container.
Offers solutions for common machine issues like print quality and paper jams.
Explains how to handle alphanumeric error messages displayed on the panel.
Guides on how to remove jammed paper from different locations.
Specifies how user access is administered and how to add/manage users.
Manages copy/print counts by assigning IDs to accounts.
To Next Page