Triumph Connectivity Module - Overview of Connectivity Module and Devices

Introduction
12
Overview
Triumph provides the My Triumph
Connectivity Module for motorcycles
that are equipped with an instrument
panel that uses a Thin Film Transistor
(TFT) digital display. This enables the
rider to pair Bluetooth -enabled devices
with the motorcycle’s instruments.
Paired devices will then connect to the
motorcycle whenever they are within
range with Bluetooth turned on.
The rider is the main user of the
Bluetooth -enabled devices, controlling
them through the joystick and the
instruments.
The passenger, if present, can be a
secondary user. This requires a
Bluetooth -enabled headset, through
which the rider can direct music,
directions and intercom.
The following devices can be paired with
the motorcycle:
• A mobile phone
The rider can use the motorcycle’s
controls to operate the connected
phone: making and receiving calls,
receiving text messages and
receiving turn-by-turn directions
from the My Triumph App on the
phone.
• One or two headsets
The headsets provide the same
audio input and output facilities
through the instruments as they
would if connected directly to the
phone. Two headsets can be used
without a phone to provide an
intercom.
• A GoPro camera
The rider can use the motorcycle’s
controls to operate a connected
camera: selecting modes, taking
photographs and making recordings.